Stain Blocking Sealer
SB-5000 Stain Blocking Sealer is a water-based fluorochemical dispersion that does not contain any silicone or wax components. It can be used indoors and outdoors, on old and new, horizontal or vertical surfaces. SB-5000 can be applied immediately after installation on most surfaces, as it is breathable and will not trap efflorescence. On new concrete, SB-5000 should be applied once concrete is fully cured (30 days after installation). SB-5000 provides an invisible and durable barrier against water, oil and organic staining which makes cleaning and maintenance easier. It is ideal for driveways, industrial flooring, building entrances, shopping malls, food courts, outdoor kitchens, garage floors and other surfaces at risk for staining. It is non-hazardous and VOC/EPA compliant. This product is ideal for professional use in the pressure wash industry.
SB-5000 has the consistency of water, is milky white when applied and dries clear with a transparent finish. Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).
Suitable for concrete and clay pavers, flat and stamped concrete, masonry, natural and manufactured stone, segmental retaining wall blocks, concrete walls and exposed aggregate. May be used on grout, unglazed tile and terra cotta. Safe to use on old or new surfaces in both inside and outside environments. Not recommended for granite, marble, asphalt, glazed or ceramic tile. Test first to verify performance and appearance before applying.
A test area is always recommended to determine product suitability and compatibility with your specific surface before use and also if desired results are achievable. Due to the inherent variability of natural stone and clay products, long term performance may vary. Please consult with us prior to sealing if there are concerns.
|Pavers & Other Hardscape Surfaces||100 – 200||9.3 – 18.6|
|Concrete||150 – 250||13.9 – 25.2|
|Retaining Walls & Other Vertical Surfaces||100 – 200||9.3 – 18.6|
Coverage based on single coat. Two coats applied wet-on-wet are recommended on surfaces that are new, porous or experience high level of traffic or staining. Actual coverage may vary depending on the type, age, condition, porosity of the surface, application method and other local conditions such as temperature & humidity.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.