The best seal starts with a clean surface, and each hardscape surface has distinctly different qualities. Whether it’s removing dirt from natural stone or residue from wetcast, we’ve designed DW Dual Wash to remove ground-in dirt, light grease, oil, and mold release agents to ensure the surface has an optimal bond with the sealer.
BENEFITS
Easy to use, concentrated formula
Polyhaze removal
Non-acidic formula
Removes ground-in dirt, light grease, and oil
APPLICATIONS
Wetcast
Granite
Limestone
Marble/Travertine
Bluestone/Sandstone
*This product is sold by the carton (four - 1 gallon bottles per carton) OR 5 gallon bucket*
INSTRUCTIONS
PREP
Thoroughly sweep surface of joint sand, dust, debris or loose material.
Spot clean if needed with one of these SRW Specialty Clean™products:
Dilute equal parts DW Dual Wash with warm clean water.
Saturate surface & surrounding area (including vegetation) thoroughly with water.
Do not allow product to dry on surface. Re-spray with water, if needed, to keep area wet. A 2-person application is recommended.
APPLY
Apply mixture directly to surface with a sprinkler can.
Scrub with a stiff bristle brush. Let sit for 5 minutes. Keep wet. Rescrub.
For large areas, work in 200 sq. ft. (18.58 sq. m.) sections.
If working on an incline, start at the highest point, working in small sections. Scrub from the bottom of the section, pushing excess DW Dual Wash up over job.
RINSE
Immediately rinse surface & surrounding areas (including vegetation) thoroughly with clean water until all traces of cleaner are gone.
