Skip to product information
1 of 4

SRW Products

SRW Products JS Joint Stabilizer™

SRW Products JS Joint Stabilizer™

Regular price $121.74 USD
Regular price Sale price $121.74 USD
Sale Sold out
Shipping calculated at checkout.

BENEFITS

  • 2-in-1: seals surface & stabilizes joints
  • Eliminates joint washout
  • Reduces weeds & ant infestation
  • No waiting: apply immediately after installation of standard jointing material
  • Natural look/matte finish
  • Resists moss, mold & mildew growth

APPLICATIONS

  • Paver hardscapes including driveways, walkways & patios
  • Open-graded base installations
  • Residential & commercial
  • Joint widths up to ¾"

 

*This product is sold by the carton (four - 1 gallon bottles per carton) OR 5 gallon bucket*

 

INSTRUCTIONS

CLEAN

  • If applying over polymeric sand, wait 28 days after installing polymeric sand before sealing. 
  • If applying over a polymeric sand install, it is recommended to use an SRW General Purpose Cleaner prior to the use of JS Joint Stabilizer. 

  • If efflorescence is present on the surface prior to install, fill joints with sand and apply EF Efflorescence Remover or PW Paver Wash to clean paver surface. Never clean a surface without jointing material between the pavers. 

  • Thoroughly sweep surface of loose joint sand or material. 

CLIMATE

  • After cleaning, wait at least 24 hours before sealing. Surface and joints must be completely dry.
  • Recommended application temperatures are 50°F-80°F (10°C-27°) from installation through the cure process.
  • Do not apply if inclement weather is forecasted within 24 hours.

APPLY

  • STIR THOROUGHLY
  • Apply with a standard garden sprayer or SRW Products sprayer. Spray & saturate the surface. Concentrate excess sealer from surface of pavers into the joints using a slit foam roller or foam squeegee. 

  • For best results, spray then back roll or squeegee. This prevents an uneven finish. A 2-person application        is recommended. 

  • Start at the highest project elevation. Do not allow sealer to pool longer than 2 minutes. 

  • Only one coat of sealer is recommended. Additional coats may create a sheen on the surface of the pavers. 

CURE

  • Protect from moisture & allow sealed area to dry and cure at least 24 hrs. 

  • Low temps and high humidity may extend dry time 

  • Dry-tack free: 60 minutes

  • Foot traffic: 24 hours

  • Vehicle traffic: 48 hours

Note all calculations based on 68°F-77°F (20°C-25°C)

View full details
  • domestic shipping only logo

    DOMESTIC SHIPPING ONLY

  • SATISFIED OR REFUNDED logo

    SATISFIED OR REFUNDED

  • customer support png

    TOP-NOTCH SUPPORT

  • secure payments logo

    SECURE PAYMENTS

1 of 4