Specialty Seal™ S-PSX is a natural-looking penetrating sealer that can be used on a variety of surfaces for both vertical and horizontal applications. It protects the surface against damaging effects of weather, deicing chemicals, oils, food, and more. It is easy to apply and retains the original appearance of granite, bluestone, sandstone, limestone, marble, travertine, and manufactured stone.
- Invisible/natural-look finish
- Protects surface from staining
- Ideal for outdoor applications
- Minimizes salt and freeze/thaw damage
- Concrete Pavers
*This product is sold by the carton (contains four - 1 gallon cans per carton) OR 5 gallon bucket*
- Wait 28 days after installing polymeric sand before sealing.
- Thoroughly sweep surface of joint sand or loose material.
- Spot clean if needed with one of the SRW Specialty Clean™ products. Then prepare surface with an SRW Products General Purpose Cleaner.
- After cleaning, wait at least 24 hours before sealing. Surface and joints must be completely dry.
- Recommended application temperatures are 50°F - 80°F (10°C - 27°C) from installation through the cure process.
- Do not apply if inclement weather is forecasted within 24 hours.
- STIR THOROUGHLY
- Apply with an SRW Products approved Slit Foam Roller and sprayer.
- For best results, spray then back roll. This prevents an uneven finish. A 2-person application is recommended.
- Let sit 10 minutes. Buff surface with a dry cloth or mop head to remove excess sealer.
- Start at the highest project elevation. Do not allow sealer to pool on surface or in joints.
- Repeat if desired.
- Allow sealed area to dry and cure 24 hours.
- Protect area from water and rain until dry.
- Dry-tack free: 25 minutes
- Foot traffic: 24 hours
- Vehicle traffic: 72 hours
Note all calculations based on 68°F-77°F (20°C-25°C)
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.