Skip to product information
1 of 6

Surebond

Surebond SB-6400 Wet Look Hybrid Penetrating Sealer

Surebond SB-6400 Wet Look Hybrid Penetrating Sealer

Regular price $510.00 USD
Regular price Sale price $510.00 USD
Sale Sold out
Shipping calculated at checkout.

SB-6400 Wet Look Hybrid Sealer is a unique water-based hybrid blend of silane/siloxane and proprietary polymers that chemically bond to the surface and repel both water and oil.  It can be used indoors and outdoors, on old and new, horizontal or vertical surfaces. SB-6400 can be applied immediately after most surface installations, as it is breathable and will not trap naturally occurring moisture or efflorescence. On new concrete, SB-6400 should be applied once concrete is fully cured (30 days after installation). SB-6400 will seal and enhance the beauty of new and old surfaces by enriching/darkening surface tone and color contrast with a natural looking matte finish.

SB-6400 protects surfaces from water penetration and salt damage from the use of de-icers or exposure to salt air. Due to its superior water repellency, SB-6400 helps to reduce biological growth such as mold, moss and algae. It is non-hazardous and VOC/EPA compliant. This product is ideal for professional use in the pressure wash industry. SB-6400 has the consistency of water, is milky white when applied and dries transparent with matte finish. Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).


FEATURES

  • Surface Enhancement: Deeply Enhances Surface Tone with Matte Finish
  • Chemically Bonded Protection: Surface Penetrating, Long Lasting & Durable
  • Silane/Siloxane Water-Based Resin Blend: Repels Water, Protects Surface from Salt Attack, Non-Hazardous and VOC/EPA Compliant
  • Breathable, Immediate Application: Does Not Trap Moisture or Efflorescence
  • Packaging: Gallon Containers (4 gallons/case) OR Five Gallon Pails

 

Suitable Surfaces

Suitable for natural and manufactured stone containing quartz or other silicas. Can also be used on concrete and clay pavers, flat and stamped concrete, masonry, segmental retaining wall blocks, concrete walls, exposed aggregate, grout, unglazed tile and terra cotta. Safe to use on old or new surfaces in both inside and outside environments. Not recommended for granite, marble, asphalt, limestone, slate, agglomerate tiles, glazed or ceramic tile. Due to the inherent variability of natural stone and clay products, performance may vary. Test first to verify performance and appearance before applying.

A test area is always recommended to determine product suitability and compatibility with your specific surface before use and also if desired results are achievable. Due to the inherent variability of natural stone and clay products, long term performance may vary. Please consult with us prior to sealing if there are concerns.

 

Coverage Per Gallon

APPLICATION SQ.FEET SQ.METERS
Natural Stone & Clay Pavers 200 – 400 18.6 – 37.1
High Density Concrete & Pavers 200 – 400 18.6 – 37.1
Low Density Concrete & Pavers 50 – 200 4.6 – 18.6




Coverage based on two coats applied wet-on-wet. Use approximately two thirds of the estimated amount on the first coat and one third on the second ensuring saturation. Actual coverage may vary depending on the type, age, condition, porosity of the surface, application method and other local conditions such as temperature & humidity.




View full details
  • domestic shipping only logo

    DOMESTIC SHIPPING ONLY

  • SATISFIED OR REFUNDED logo

    SATISFIED OR REFUNDED

  • customer support png

    TOP-NOTCH SUPPORT

  • secure payments logo

    SECURE PAYMENTS

1 of 4