Surebond

Surebond S.R.B Stain & Rust Buster

Surebond S.R.B Stain & Rust Buster

Regular price $246.00 USD
Regular price Sale price $246.00 USD
Sale Sold out
Shipping calculated at checkout.

Stain & Rust Buster

 

FEATURES

  • Powerful Targeted Cleaning Action: Cleans a Wide Range of Organic, Non-Greasy Stains
  • Fast Acting: Attacks Stains in Minutes
  • Safe For Most Surfaces: Does Not Damage or Etch Surfaces with Proper Dilution
  • Environmentally Friendly: Biodegradable
  • Concentrated Formula: Customize Strength to Match Cleaning Needs
  • Clean Rinse Technology: Dirt & Cleaner Residue Rinses Away Easily
  • Packaging Options: Quart Containers (12 quarts/case) or Five Gallon Pails

 

S.R.B. is a powerful concentrated spot cleaner that dislodges and removes many common organic stains without damaging the surface when following dilution instructions.  Its biodegradable, environmentally friendly formula works well on moss, mildew, leaf, rust, blood, beverage spills and non-greasy food stains. S.R.B. can be used outside, on old and new, horizontal or vertical surfaces to remove stains before cleaning the surface overall with Surebond’s SureClean or Efflo Off. 

S.R.B.’s Clean Rinse Technology allows dirt and cleaner residue to be quickly and easily rinsed away with a low or high pressure washer.  S.R.B. is concentrated and requires dilution prior to use. With proper dilution, it is safe to use on surfaces sealed with Surebond sealers. This product is ideal for professional use in the pressure wash industry.

 

Suitable Surfaces

Suitable for concrete and clay pavers, flat and stamped concrete, masonry, natural and manufactured stone, segmental retaining wall blocks, concrete walls and exposed aggregate. Can also be used on tile, terrazzo and stucco.  Safe to use on old or new surfaces in outside environments. Use caution on sensitive surfaces such as wet cast pavers and stamped concrete as it may cause damage to color of the surface. Not for use on asphalt. Test first to verify suitability, dilution rate and dwell time before cleaning. S.R.B. is compatible with all Surebond Sealers with proper dilution, dwell time and application. Misuse may cause damage to the sealer. A test area is always recommended to determine product suitability and compatibility with your specific surface before use and also if desired results are achievable.

 

Coverage Per Gallon Of Diluted Product

APPLICATION SQ.FEET SQ.METERS
All Surfaces 100 – 250 9.3 – 23.2

 

Coverage based on single treatment. Some applications may require additional treatments. Coverage rate may vary depending on the surface porosity, texture, severity of staining, application method and local conditions.

 

Surface & Air Temperatures

Excessively high or low temperatures will produce poor results. Best cleaning results are obtained when air and surface temperatures are 40° F or above. Do not clean when temperatures are below freezing or will be overnight. If freezing conditions exist, allow adequate time for the surface to thaw. If air temperatures exceed 90° F, flash cool the surface with water before applying the product. Do not allow product to dry on a hot surface.

Preparation

Sweep and remove all loose soil and debris from the surface. Protect adjacent and surrounding surfaces not intended to be cleaned. Before using S.R.B., test on a small, inconspicuous area to determine the suitability, dilution, and correct dwell time of this product for your surface. Allow test areas to dry thoroughly before evaluating the final appearance and results.

Dilution

S.R.B. is a spot cleaner that needs to be diluted prior to use. The amount of dilution is dependent on the level of strength needed for the severity of the stain and the type of surface. Only use what is needed to efficiently clean as under dilution (too strong) may cause damage to the substrate. See ‘Coverage Rates’ for the amount of product needed for your cleaning needs. To make a dilution that is ready to use, pour the desired amount of S.R.B. into an empty and clean container, then fill the balance of the container with water and mix.

SRB Quart

Application

Apply dilution of S.R.B. using a low-pressure sprayer (garden sprayer/spray bottle). Allow to soak into the surface for 5 to 10 minutes. Scrub with a brush to agitate and break down stains. Brushless cleaning requires two applications of S.R.B. spaced several minutes apart without allowing it to dry on the surface. The first pass is to penetrate and the second is to lift the stain out. A hot water pressure washer will further break down surface stains. Rinse thoroughly. Stronger concentrations and secondary cleanings may be needed to remove heavier, deep-set stains. Excessive high pressure can damage substrates.

 

S.R.B STAIN & RUST BUSTER TECHNICAL DATA SHEET

View full details
  • domestic shipping only logo

    DOMESTIC SHIPPING ONLY

  • SATISFIED OR REFUNDED logo

    SATISFIED OR REFUNDED

  • customer support png

    TOP-NOTCH SUPPORT

  • secure payments logo

    SECURE PAYMENTS

1 of 4