Surebond

Surebond SB-7700 Enhanced Look Gloss Finish Joint Stabilizing Sealer

Surebond SB-7700 Enhanced Look Gloss Finish Joint Stabilizing Sealer

Regular price $300.00 USD
Regular price Sale price $300.00 USD
Sale Sold out
Shipping calculated at checkout.
Industry's Most Trusted Moderately Enhancing Joint Stabilizing Sealer


FEATURES

  • Multi-Purpose Product:  Seals & Moderately Enhances Surface and Hardens Joint Sand
  • Antifungal Film Protection: Protects Sealer Film from Mold, Moss & Algae
  • Stain Resistant:  Promotes Easier Cleaning & Maintenance
  • Stabilizes Joint Sand:  Reduces Sand Washout, Weeds & Insect Infestation
  • Surface Enhancement: Moderately Enhances Surface Tone & Semi-Gloss Finish
  • Breathable, Immediate Application:  Does Not Trap Moisture or Efflorescence
  • Packaging: Gallon Containers (4 gallons/case)  OR Five Gallon Pails

 

SB-7700 Joint Stabilizing Sealer is a water-based, single component, self-crosslinking acrylic co-polymer sealer and joint sand stabilizer with outstanding durability. It can be used inside and outside, on old and new, horizontal or vertical surfaces to provide surface protection and stabilize newly installed joint sand in one application process. SB-7700 can be applied immediately after surface installation, as it is breathable and will not trap naturally occurring moisture or efflorescence. SB-7700 protects the surface from salts, acids and other corrosive chemicals as well as minimizes overall surface weathering and deterioration.  On a newly installed or restored surface, SB-7700 will moderately enhance with a semi-gloss finish and provide stain resistance which makes cleaning and maintenance easier.  SB-7700 is specially formulated with an antifungal designed to help inhibit the growth of mold, moss and algae on the sealer film.  It is non-hazardous and VOC/EPA compliant. SB-7700 has the consistency of water, is milky white when applied and dries clear with semi-gloss finish. Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).

Surebond Joint Stabilizing Sealers can be used just as a sealer for pavers, concrete and other masonry surfaces without joint sand stabilization. This product is ideal for professional use in the pressure wash industry.

 

Suitable Surfaces

Suitable for concrete and clay pavers, flat and stamped concrete, masonry, natural and manufactured stone, segmental retaining wall blocks, concrete walls and exposed aggregate. Ideal for shaded areas, pool decks and outdoor showers where mildew, fungus and algae are a concern.  Safe to use on old or new surfaces in both inside and outside environments. Not recommended for granite, marble, asphalt, glazed or ceramic tile. Test first to verify performance and appearance before applying.

A test area is always recommended to determine product suitability and compatibility with your specific surface before use and also if desired results are achievable. Due to the inherent variability of natural stone and clay products, long term performance may vary. Please consult with us prior to sealing if there are concerns.

 

Coverage Per Gallon

APPLICATION SQ.FEET SQ.METERS
Sealing with joint stabilization 80 – 120 7.4 – 11.1
Sealing without joint stabilization 150 – 300 13.9 – 27.9

 

Coverage based on one coat.  Actual coverage may vary depending on the type, age, condition, porosity of the surface, application method and other local conditions such as temperature and humidity.

 

SB-7700 TECHNICAL DATA SHEET

View full details
  • domestic shipping only logo

    DOMESTIC SHIPPING ONLY

  • SATISFIED OR REFUNDED logo

    SATISFIED OR REFUNDED

  • customer support png

    TOP-NOTCH SUPPORT

  • secure payments logo

    SECURE PAYMENTS

1 of 4